Equipment List for 450 Quad build
450 quad kit build includes:
- 8 – 10/4.5 MultiRotor (MR) Props Clockwise and Counter Clockwise (4 – CW &
4 – CCW) - 4 – 2212 – 920Kv Motors w/Spinner Cap and Mounting Screws
- 1 – 8” Velcro Strap (for battery)
- 6 – Quadcopter Arms
- 1 – 450 mm Quad Frame w/Power Distribution Board (PDB)
- 4 – 30 amp Electronic Speed Controllers
- 1 – TxRx Controller (Taranis or Spectrum)
- 1 – Receiver Module (Taranis or Spectrum)
- 1 – Naza Mv2 Flight Control Board (FCB)
- 1 – Naza Mv2 Power Module Unit (PMU)
- 1 – Naza Mv2 GPS Receiver Module
- 1 – GPS Mast
- 5 – 4000mAh 3s Lithium Polymer (LiPo) Batteries
- 1 – XT60 Male Power Cable Connector 14AWG 10cm.
- 5 – XT60 Female Power Cable Connector14AWG 10cm.
- 1 – Shrink Tube 1’ – 6mm. (for battery connectors and bullet connectors)
- 1 – Shrink Tube 1’ – 12mm.
- 12 – Male Bullet Connectors (3.5- 4mm).
- 12 – Female Bullet Connectors (3.5 – 4mm).
- 2 – 6” Black and Red 14 gauge Electrical Wires
- 1 – Velcro Battery Strap
- 1 – 12” Red High Density Waterproof LED Flexible Strip
- 1 – 12” Green High Density Waterproof LED Flexible Strip
- 2’ – 22 Gauge Red and White Jumper Wire
- 4 – Landing Gear Skids (for DJI F450)
- 8 – 4” Servo Connectors
Tools: - Mr. Jig Solder Aid
- Soldering Iron
- Rosin Core Solder (60/40)
- Solder Flux Pen
- Solder Extractor
- Hot Glue Gun w/Glue Stick
- Multi Tool 1.5, 2, 2.5, and 3mm Hex Head
- LiPo battery Checker
- LiPo Battery Charger
- Thread Lock
- Safety Glasses
- USB to Micro USB Cable
- Scotch Red Extreme Adhesive Tape
- Wire Cutter
- 12 – 6” Cable Ties
- Black Liquid Tape (Optional)
- Multi-Meter Voltage Tester (Optional)
Need: - 120v Power outlet
- Computer, Monitor, w/Keyboard, and Mouse
- Internet Access
- Work Bench
- Chair
- Federal Aviation Administration (FAA) Hobbyist Registration #
- Label Maker
- Park or Open Field for Flight Test
- Academy of Model Aeronautics Membership (Recommended)